Fil-Stik® (Fill Stick)

Fill in nicks and scratches quickly and easily
Works on most wooden surfaces on low traffic areas
Rub on and level off application for an easy fill

Eliminate any scratches or abrasions on wood and leather furniture, picture frames, plastics and paneling with Fil-Stik®, our semi-soft wax filler stick. You can simply level off this rub-on putty wax stick with a credit card to leave an even fill.

NOTE: COLORS ARE APPROXIMATE REPRESENTATIONS OF ACTUAL COLORS USING MODERN PROCESS TECHNIQUES. VARIATIONS MAY OCCUR.

Select color for purchasing options:

Select Color

Step-By-Step Instructions

Directions

Step 1

Use a Leveler Card or an old charge card or a plastic putty knife to remove any loose splinters in the area to be filled, especially splinters that rise above the plane of the surface.

Step 2

Pick the color of Fill Stick that is closest to the finish on your furniture. If there is no exact match, a color that is a little too dark will look better than a color that is too light.

Step 3

Briskly rub the end of the Fill Stick over the damage, applying pressure as you rub. Stop the application when the damage is filled.

Step 4

Scrape away the excess Fill Stick material with the Leveler Card, old credit card or a plastic putty knife. Angle the card in the direction you are scraping. Scrape until the fill is even with the wood.

Step 5

Excess wax around the repair area will appear shiny. Use a soft, clean cloth to wipe away the excess wax around the edge of the fill. Be careful not to wipe the repair.